1. Request you’re here
  2. Pricing
  3. Contacts
BlaBlaPrice

Start a free chat with service providers and get prices straight from them.

BlaBlaPrice Pros will reply to you, for example like this
Bayside Paving Co

Concrete pavers laid from about A$90 per square metre in Brisbane, materials and labour included. Is the area for foot traffic or cars, and how big is it?

Murray Stone & Paving

Natural stone paving in Adelaide usually runs A$130–A$280 per square metre. Do you know the area in square metres, and would you prefer a concrete or stone finish?

Coastline Landscape Works

Paving typically starts from about A$40 per square metre in Sydney, depending on the pavers. Do you need drainage or kerbs too, and what is the site address?

BlaBlaPrice

See how it works

What size is the paved area?
Add details:
BlaBlaPrice

Paving prices in Australia: materials, licences and season

Paving in Australia typically costs about A$40 to A$280 per square metre, depending on the material. Concrete pavers sit at the lower end of the range and natural stone at the top. The quickest way to get prices for your area is to describe the job in a free BlaBlaPrice request.

Approximate prices in Australia, November 2026 (sellers' websites)
Paving typePrice per square metre
Concrete paversA$90–A$150
Clay paversA$100–A$170
Natural stone paversA$130–A$280
Crazy paving and flagstoneA$60–A$100

Licences that apply to paving

In Queensland a licence is needed for brick and segmental paving work valued over A$3,300, so check that your paver holds the right licence class before you sign. Other states set their own licence fees and rules. Ask each paver which licence they hold and whether it covers your job.

Season and weather

Summer runs from December to February and winter from June to August. Spring (September to November) and autumn are usually the most practical times to lay pavers. Wet ground in winter can delay the work, because the base has to be dry and firm before the pavers go down. Agree the start date with your paver and ask how weather delays are handled.

How paving is priced and measured

Paving is priced per square metre, so measure the area as length times width in metres and put the result in your request. Pavers are also sold per pack or per block, so ask which unit the quote uses. Some cost guides show lower figures, around A$40 to A$100 per square metre, while driveways cost much more, from about A$1,500 for a small gravel drive.

What to put in your request

Give the floor area in square metres, the material you like (concrete, clay or natural stone), and whether the surface will carry foot traffic or vehicles. Mention the surface preparation, kerbs and drainage, the site address, your deadline and your budget. Sellers can then quote for your job rather than an average one.

On BlaBlaPrice you describe the paving job in your own words in a free chat. The AI asks for missing details, looks through sellers' websites and price lists in Australia, and shows the prices and businesses it found. Local sellers reply in the chat with their own offer, including price, terms and delivery, and your contact details stay hidden until you decide who to share them with. Start a request or see construction and renovation services.

Questions and answers

How much does paving cost per square metre in Australia?

Approximately, according to sellers' websites, November 2026, concrete pavers cost A$90–A$150 per square metre, clay pavers A$100–A$170 and natural stone A$130–A$280.

Do I need a licence to lay pavers?

In Queensland, yes, for brick and segmental paving work valued over A$3,300. In other states, ask the paver which licence they hold and whether it covers your job.

When is the best time to lay pavers?

Spring (September to November) is usually the most practical. Winter rain (June to August) can delay the work.

Popular questions

  • Looking for “Paving”?
    1. Create a free request you’re here
    2. We’ll compare prices in price lists and on websites
    3. Get personal offers
    4. Exchange contacts with the one you choose
  • How does BlaBlaPrice find prices for “Paving”?
    It compares prices from providers’ price lists, looks through their websites and rates every option against your request: what exactly they’ll do, the price, the timing and the terms. You see what fits you.
  • How do I write a good request?
    Give the main things: the model or what exactly needs doing, condition (new / used), quantity, area and timing. The “Add details” buttons will suggest what to write.
  • How do sellers reply?
    Each seller sends you a personal offer with a price and terms. BlaBlaPrice puts the best value on top, and you choose.
  • Who will see my request?
    Sellers from the right category: BlaBlaPrice picks it. They don’t see your contacts, only the one you choose does.
  • How much does it cost?
    Free for buyers.
chat-bubble