New request
Electronics > Backup power
Voltage stabilisers
Now
  1. Request you’re here
  2. Pricing
  3. Contacts
BlaBlaPrice

Start a free chat with sellers and get prices straight from them.

BlaBlaPrice Sellers will reply to you, for example like this
Karoo Power Electrical

Our 1 kVA servo stabilisers start from about R 805 in Johannesburg, and we deliver in Pretoria too. How many watts is the fridge and TV you want to protect?

Coastal Power Supplies

Three-phase servo units from about R 29,506 for 10 kVA, and we fit them in Durban. Is your supply single or three phase, and what is the grid voltage at the socket?

Gqeberha Relay Stores

Household 3 kVA units start from about R 6,450 and LED-light models from R 48 in Gqeberha. Do you need it plug-in or hard-wired?

BlaBlaPrice

See how it works

What will you connect?
Add details:
BlaBlaPrice

Voltage stabilisers: prices and how to choose one in South Africa

A voltage stabiliser in South Africa costs from about R 48 for a small LED unit and R 805 to R 2,763 for a household kVA model. A 3 kVA to 5 kVA single-phase unit is around R 6,450 to R 8,251, and three-phase units start near R 29,506. For a quote that fits your equipment and wiring, describe what you need in the request on BlaBlaPrice and sellers will reply.

Approximate prices in South Africa, October 2026 (sellers' websites)
TypeRatingPrice
Plug-in stabiliserSmall applianceR 48 – R 150
Household stabiliser500 VA to 1 kVAR 805 – R 2,763
Household stabiliser3 kVA to 5 kVA, single phaseR 6,450 – R 8,251
Servo stabiliser10 kVA to 200 kVA, three phasefrom R 29,506

Standards and what to check

No South African law mandates voltage stabilisers, but the wiring code SANS 10142-1 requires permanently wired equipment to be installed by a qualified person, so any hard-wired model needs an electrician. Check the rated input and output against the grid, which runs at 230 V and 50 Hz. If a seller claims NRCS or SABS compliance, ask to see the paperwork before you buy.

Why voltage matters here, and in which season

A seller's listing ties stabilisers to load-shedding surges and voltage dips, which is the main reason households buy one. Summer, from December to February, means fridges and air conditioners work hard, and winter, from June to August, adds heaters and kettles. October is a sensible time to size a unit before the hot months raise the peak load.

How stabilisers are bought here

Ratings are in volt-amperes (VA) or kilovolt-amperes (kVA), and 1 kVA equals 1,000 VA. Choose a rating above the total power of what you connect, not the total of everything in the house. Single-phase and three-phase models are different products, so check the phases in your supply first. Prices are per unit, and sellers in Johannesburg, Cape Town, Durban, Pretoria and Gqeberha can quote delivery and fitting to your city.

What to write in your request

List what you want to connect, such as a fridge, a television or a pump, and the total power in watts or VA. Say whether the unit should be plug-in or hard-wired, whether your supply is single or three phase, and what voltage you measure at the socket. Give the make and model if you have them, say whether new or used is acceptable, and add your city and budget.

Offers for voltage stabilisers come through BlaBlaPrice. Describe the equipment and the wiring in your own words in the chat, and sellers reply with price, terms and delivery. BlaBlaPrice's AI asks for missing details and looks through sellers' websites and price lists in South Africa, then shows what it found. Your contact details stay hidden until you choose to share them. For related equipment, see backup power, or start with a request on the home page.

Questions and answers

How much does a voltage stabiliser cost in South Africa?

A small plug-in unit costs about R 48 to R 150, a household unit of 500 VA to 1 kVA about R 805 to R 2,763, and a three-phase servo unit from about R 29,506, according to sellers' websites in October 2026.

Is a stabiliser required by law?

No South African law mandates voltage stabilisers. Hard-wired equipment, however, must be installed by a qualified person under the wiring code SANS 10142-1.

What voltage should it be rated for?

South Africa's grid runs at 230 V and 50 Hz, so check that the unit matches this and ask for NRCS or SABS paperwork.

Do I need a single-phase or three-phase unit?

It depends on your supply and the load. Check your phases before you order and state them in the request.

Popular questions

  • Looking for “Voltage stabilisers”?
    1. Create a free request you’re here
    2. We’ll compare prices in price lists and on websites
    3. Get personal offers
    4. Exchange contacts with the one you choose
  • How does BlaBlaPrice find prices for “Voltage stabilisers”?
    It compares prices straight from sellers’ price lists, with no mark-ups, looks through their websites and rates every option against your request: what exactly is offered, the price, delivery and warranty. You see what fits you.
  • How do I write a good request?
    Give the main things: the model or what exactly needs doing, condition (new / used), quantity, area and timing. The “Add details” buttons will suggest what to write.
  • How do sellers reply?
    Each seller sends you a personal offer with a price and terms. BlaBlaPrice puts the best value on top, and you choose.
  • Who will see my request?
    Sellers from the right category: BlaBlaPrice picks it. They don’t see your contacts, only the one you choose does.
  • How much does it cost?
    Free for buyers.
chat-bubble